fbpx

Our Advertising Specs

Advertising Spec Sheets

(CLICK ON DOWNLOAD NOW BUTTON TO DOWNLOAD SPEC SHEETS.)

  • All Artwork Specs
  • Full Page Specs
  • JUNIOR PAGE AD SPECS
  • HALF PAGE AD SPECS
  • QUARTER PAGE AD SPECS
  • EIGHTH PAGE SHOWCASE AD SPECS
  • BOOTH SHOWCASE AD
  • FRONT COVER BOX AD SPECS
  • INSERT/FLYER AD Specs
  • FRONT COVER BANNER
  • DOUBLE PAGE SPREAD AD
  • FRONT OUTSERT PANEL AD SPECS
  • BACK OUTSERT PANEL AD SPECS
  • Front Cover Editorial Example
  • Inside Unit of Editorial Example

PLEASE NOTE– All ads that bleed to the edge of the page must be set up to the bleed dimensions. If your ad is submitted at trim size, your ad may not be trimmed as expected. The full page ad will get trimmed on the top, bottom, left and right sides. Please make sure that your text information is at least a .25 inch in from the bleed size on all sides. (Refer to Safe Area dimensions)

If you need expert design assistance, Source Group will create your ad for a small fee. Contact the art department for details.

Dimensions:
Bleed Area – 11.125″ x 14.25″
Trim Area – 10.875″ x 14″
Safe Area – 9.875″ x 13″

PLEASE NOTE– All ads that bleed to the edge of the page must be set up to the bleed dimensions. If your ad is submitted at trim size, your ad may not be trimmed as expected. The full page ad will get trimmed on the top, bottom, left and right sides. Please make sure that your text information is at least a .25 inch in from the bleed size on all sides. (Refer to Safe Area dimensions)

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

Dimensions:
Bleed Area – 8.1″ x 10″
Trim Area – 7.825″ x 9.75″
Safe Area – 7.25″ x 9.25″

PLEASE NOTE: – All ads that bleed to the edge of the page must be set up to the bleed dimensions. If your ad is submitted at trim size, your ad may not be trimmed as expected. The junior page ad will get trimmed on the bottom and EITHER the left or right side depending on placement in the issues. DO NOT include crop marks on the ad.  Please make sure that your text information is within the Safe Area dimensions.

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

Dimensions:
Bleed Area – 11.125″ x 7″
Trim Area – 10.875″ x 6.875″
Safe Area – 9.875″ x 6.5″

PLEASE NOTE: – All ads that bleed to the edge of the page must be set up to the bleed dimensions. If your ad is submitted at trim size, your ad may not be trimmed as expected. The junior page ad will get trimmed on the bottom and EITHER the left or right side depending on placement in the issues. DO NOT include crop marks on the ad.  Please make sure that your text information is within the Safe Area dimensions.

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

Dimensions:
4.75″ x 6.375″

PLEASE NOTE: – All ads must be set up to the exact dimensions. Your ad will be not be near the trim of the publication, so there is no need to worry about bleed or trim area.

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

Dimensions:
4.875″ x 3″

PLEASE NOTE: – All ads must be set up to the exact dimensions. Your ad will be not be near the trim of the publication, so there is no need to worry about bleed or trim area.

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

Dimensions:
4.75″ x 4.125″

PLEASE NOTE: -All ads must be set up to the exact dimensions. Your ad will be not be near the trim of the publication, so there is no need to worry about bleed or trim area.

Dimensions:
3″ x 3″

PLEASE NOTE– All ads that bleed to the edge of the page must be set up to the bleed dimensions. If your ad is submitted at trim size, your ad may not be trimmed as expected. The full page ad will get trimmed on the top, bottom, left and right sides. Please make sure that your text information is at least a .25 inch in from the bleed size on all sides. (Refer to Safe Area dimensions)

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

Dimensions:
Bleed Area – 8.75″ x 11.25″
Trim Area – 8.5″ x 11″
Safe Area – 8″ x 10.5″

PLEASE NOTE: – All ads that bleed to the edge of the page must be set up to the bleed dimensions. If your ad is submitted at trim size, your ad may not be trimmed as expected. The insert will get trimmed on all sides.

Please make sure that your text information is at least a .25 inch in from the bleed size on all sides. (Refer to Safe Area dimensions)

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

Dimensions:
Bleed Area – 11.125″ x 3″
Trim Area – 10.875″ x 2.875″
Safe Area  – 9.875″ x 2.75″

All ads that bleed to the edge of the page must be set up to the bleed dimensions. If your ad is submitted at trim size, your ad may not be trimmed as expected. The banner ad will get trimmed on the top, left and right sides.

Please make sure that your text information is at least a .25 inch in from the bleed size on the top left and right sides. (Refer to Safe Area dimensions)

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

Dimensions:
Bleed Area – 22″ x 14.25″
Trim Area – 21.75″ x 14″
2 Safe Areas – 9.875″ x 13″

PLEASE NOTE: – All ads that bleed to the edge of the page must be set up to the bleed dimensions. If your ad is submitted at the trim size, your ad may not be trimmed as expected. The tabloid spread will get trimmed on the top, bottom, left and right sides. Please make sure that your text information is at least a .25 inch in from the bleed size on all sides. (Refer to both Safe Area dimensions) If you need expert design assistance, Source Group will create your ad for a small fee. Contact the art department for details.

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

Dimensions:
Bleed Area – 11.125″ x 5.25″
Trim Area – 10.875″ x 5″
Safe Area – 9.875″ x 4.75″

PLEASE NOTE: – All ads must be set up to the exact dimensions. Your ad will be not be near the trim of the publication, so there is no need to worry about bleed or trim area.

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

Dimensions:
Bleed Area – 11.125″ x 5.25″
Trim Area – 10.875″ x 5″
Safe Area – 9.875″ x 4.75″

PLEASE NOTE: – All ads must be set up to the exact dimensions. Your ad will be not be near the trim of the publication, so there is no need to worry about bleed or trim area.

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD SUBMISSIONS.

FRONT COVER UNIT OF EDITORIAL/PROFILE REQUIREMENTS

 A Microsoft .doc file (300-500 words)

  • Pick one of the three styles below. You may combine styles. All articles will be edited in AP style by our staff upon submission and returned for your approval. There are 3 samples below in this document for a guide.
  1. Interview Style/Question & Answer Format
  2. Company Profile/Product Feature
  3. Standard Press Release

** Please include a headline and any contact information for your company (website, phone number and booth number) within the article. **

A COLOR photo of a product, logo or person mentioned in the article.

(CMYK, 300 DPI, 1.3 inches wide x 1.3 inches high, .jpg format preferred)

** PLEASE SEND IMAGE AS A SECOND ATTACHMENT FOR BEST POSSIBLE QUALITY **

If you have any questions about these guidelines, please contact
Production at 520-722-2000 or email materials@sourceg.net.

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD & EDITORIAL SUBMISSIONS.
Download Spec Sheet

INSIDE UNIT OF EDITORIAL REQUIREMENTS

 A Microsoft .doc file (300-500 words)

  • Pick one of the three styles below. You may combine styles. All articles will be edited in AP style by our staff upon submission and returned for your approval. There are 3 samples below in this document for a guide.
  1. Interview Style/Question & Answer Format
  2. Company Profile/Product Feature
  3. Standard Press Release

** Please include a headline and any contact information for your company (website, phone number and booth number) within the article. **

A COLOR photo of a product, logo or person mentioned in the article.

(CMYK, 300 DPI, 2.3 inches wide x 2.3 inches high, .jpg format preferred)

** PLEASE SEND IMAGE AS A SECOND ATTACHMENT FOR BEST POSSIBLE QUALITY **

If you have any questions about these guidelines, please contact
Production at 520-722-2000 or email materials@sourceg.net.

 DON’T FORGET TO INCLUDE YOUR BOOTH NUMBER IN ALL AD & EDITORIAL SUBMISSIONS.
Download Spec Sheet

BECOME OUR CLIENT TODAY

 Email us today and receive a discount on your first advertisement bundle!