iQ Power Tools, manufacturer of premium power tools with integrated dust collection technology, presents the iQMS362, the newest in the iQ360 line of masonry saws. Whether the materials are small or large, this tool is designed to save cutting time and increase productivity.
Durable and portable, the iQMS362 is built to tackle any job site. The iQMS362’s 16.5” Q-Drive blade was engineered specifically for this tool. Tests have shown this blade cuts 40% faster than its competitors and with more accuracy. The Q-Drive blade cuts masonry materials in a wide range of shapes, sizes, weights, and densities; from soft, manufactured stone to very dense pavers or granite.
As if that isn’t enough, the iQMS362 eliminates the dust cloud, allowing workers to increase their efficiency and productivity while staying compliant with the new OSHA regulations. The iQMS362 was designed with the health and safety of its operator in mind, meeting the OSHA Silica Permissible Exposure Limit (PEL) of 50 micrograms of respirable crystalline silica per cubic meter of air (μg/m3), averaged over an eight-hour day.
The iQMS362 features the following industry firsts:
- 16.5” Q-Drive blade with a 5.5” depth and a full 24” length of cut
- IQ Power Management System allows the saw to run on 120 volts and 20 amps
- 270° Dust Reduction System
- 3 Stage Cyclonic Filtration
- Easy Transport System includes high-flotation tires, an integrated Stand with gas-shock powered lifting/lower mechanism
- Unmatched cutting speed
- OSHA Silica PEL compliant
The iQMS362 was designed to overcome common power limitations of most high-powered masonry saws which operate on 220v of electricity. It operates using a standard 120v and 20 amps, eliminating the need for a 220v plug adapter or high-output generator. Integrated with soft start technology, the iQ Power Management System controls the power ramp up without the spike.
With unrivaled portability, cutting performance and speed, the iQMS362 is the ultimate saw for serious masonry and hardscape professionals.
See the iQMS362 in action at iQ Power Tools’ Inside Booth #C3327 at Outside Booth Broze Lot, Dustless Zone
For more information, please contact Sarah Hurtado, Marketing Communications Manager
Sarah.Hurtado@iqpowertools.com | PO Box 7449, Moreno Valley CA Phone 888-274-7744 | Fax 888.428.4485 | www.iQPowerTools.com